Overhaul Service - £125
What's included:
As Main Service plus the following:
Remove headset bearings & bottom bracket bearings clean, inspect and grease as required
Visual inspection of carbon fork steerer
Wheels “as above” plus inspect hub bearings, freehub, clean & grease as required.
Wheels tensioned and trued (off bike) check spoke tension to manufacturer's specification (Mid to high end wheels)
Clean chain and cassette off bike. Soak and Scrub
Clean derailleurs
Clean brake discs or remove brake calipers clean and lube
Clean suspension stanchions
Replace gear cables (Extra charge for gear cables that fit in bars, stem, frame and re tape bars)
Diagnostic report, check & advise on any further work necessary
Extras on a Main & Overhaul service:
Pawls & spring to be replaced in freehub, annual service plus inspect bearings.
Pedal service (or replacement) replace bearings and grease, clean threads and refit.
Stem & handle bar clamp bolts - check for corrosion, hex head for damage and replace if necessary.
Extras MTB:
Suspension service
Frame bearing, mountings and bushing replacement
Setup suspension
Replace chain (And cassette)
Replace tubeless sealant
Replace brake cables
Replace gear* on main service
Bleed brake system
Extras Road/Commuter/Tri/Cyclocross
Tape bars
Replace Chain (And cassette)
Replace brake cables
Replace gear cables* on main service
Bleed brake system
Di2 Updates
Any extras & any parts used are chargeable, your bike will be checked first and you will be given an estimate or further investigation may be required.
A detailed report on the customer bicycle will be completed by Paul, the Cycle Technician, using a checklist. Any items identified will be clearly explained to the customer and they may be sent a video or photo to support the report. We will advise whether work is urgent and gain approval for any work to be carried out on the day. Alternatively, we will advise of any items to keep an eye for the future or requires replacing at a certain time or mileage.